A Multi-Streamline Approach for Upcycling PET into a Biodiesel and Asphalt Modifier.

The non-degradable nature of petroleum-based plastics and the dependence on petroleum-based products in daily life and production are dilemmas of human development today. We hereby developed a plastic waste upcycling process to address these challenges. A multi-stream fraction strategy was developed to process poly (ethylene terephthalate) (PET) plastics into soluble and insoluble fractions. The soluble fraction was used as a sole carbon source for microbial fermentation to produce biodiesel precursor lipids with an appreciable bioconversion yield. The insoluble fraction containing fractionated polymers was used as the asphalt binder modifiers. The downsized PET additive improved the high-temperature performance of the asphalt binder by 1 performance grade (PG) without decreasing the low-temperature PG. Subsequent SEM imaging unveiled alterations in the micromorphology induced by PET incorporation. Further FTIR and 1H NMR analysis highlighted the aromatic groups of PET polymers as a crucial factor influencing performance enhancement. The results demonstrated the multi-stream fraction as a promising approach for repurposing plastic waste to produce biodiesel and modify asphalt. This approach holds the potential to tackle challenges in fuel supply and enhance infrastructure resilience to global warming.

Lignin - A green material for antibacterial application - A review.

Lignin's antibacterial properties have become increasingly relevant due to the rise of microbial infectious diseases and antibiotic resistance. Lignin is capable of interacting electrostatically with bacteria and contains polyphenols that cause damage to their cell walls. These features make lignin a desirable material to exhibit antibacterial behavior. Therefore, lignin in antibacterial applications offers a novel approach to address the growing need for sustainable and effective antibacterial materials. Recent research has explored the incorporation of lignin in various biomedical applications, such as wound dressings, implants, and drug delivery systems, highlighting their potential as a sustainable alternative to synthetic antibacterial agents. Furthermore, the development of lignin-based nanomaterials with enhanced antimicrobial activity is an active area of research that holds great promise for the future. In this review, we have provided a summary of how lignin can be incorporated into different forms, such as composite and non-composite synthesis of antibacterial agents and their performances. The challenges and future considerations are also discussed in this review article.

Machine and Deep Learning: Artificial Intelligence Application in Biotic and Abiotic Stress Management in Plants.

Biotic and abiotic stresses significantly affect plant fitness, resulting in a serious loss in food production. Biotic and abiotic stresses predominantly affect metabolite biosynthesis, gene and protein expression, and genome variations. However, light doses of stress result in the production of positive attributes in crops, like tolerance to stress and biosynthesis of metabolites, called hormesis. Advancement in artificial intelligence (AI) has enabled the development of high-throughput gadgets such as high-resolution imagery sensors and robotic aerial vehicles, i.e., satellites and unmanned aerial vehicles (UAV), to overcome biotic and abiotic stresses. These High throughput (HTP) gadgets produce accurate but big amounts of data. Significant datasets such as transportable array for remotely sensed agriculture and phenotyping reference platform (TERRA-REF) have been developed to forecast abiotic stresses and early detection of biotic stresses. For accurately measuring the model plant stress, tools like Deep Learning (DL) and Machine Learning (ML) have enabled early detection of desirable traits in a large population of breeding material and mitigate plant stresses. In this review, advanced applications of ML and DL in plant biotic and abiotic stress management have been summarized.

Unleashing the capacity of Rhodococcus for converting lignin into lipids.

Bioconversion of bioresources/wastes (e.g., lignin, chemical pulping byproducts) represents a promising approach for developing a bioeconomy to help address growing energy and materials demands. Rhodococcus, a promising microbial strain, utilizes numerous carbon sources to produce lipids, which are precursors for synthesizing biodiesel and aviation fuels. However, compared to chemical conversion, bioconversion involves living cells, which is a more complex system that needs further understanding and upgrading. Various wastes amenable to bioconversion are reviewed herein to highlight the potential of Rhodococci for producing lipid-derived bioproducts. In light of the abundant availability of these substrates, Rhodococcus' metabolic pathways converting them to lipids are analyzed from a "beginning-to-end" view. Based on an in-depth understanding of microbial metabolic routes, genetic modifications of Rhodococcus by employing emerging tools (e.g., multiplex genome editing, biosensors, and genome-scale metabolic models) are presented for promoting the bioconversion. Co-solvent enhanced lignocellulose fractionation (CELF) strategy facilitates the generation of a lignin-derived aromatic stream suitable for the Rhodococcus' utilization. Novel alkali sterilization (AS) and elimination of thermal sterilization (ETS) approaches can significantly enhance the bioaccessibility of lignin and its derived aromatics in aqueous fermentation media, which promotes lipid titer significantly. In order to achieve value-added utilization of lignin, biodiesel and aviation fuel synthesis from lignin and lipids are further discussed. The possible directions for unleashing the capacity of Rhodococcus through synergistically modifying microbial strains, substrates, and fermentation processes are proposed toward a sustainable biological lignin valorization.

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin.

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34 % and 84.15 %, with residual glucan showing a ~90 % enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51 % yield, exhibiting 96.65 % ß-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31P NMR and GPC analysis. This study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

Atomistic Simulations of Polydisperse Lignin Melts Using Simple Polydisperse Residue Input Generator.

Understanding the physics of lignin will help rationalize its function in plant cell walls as well as aiding practical applications such as deriving biofuels and bioproducts. Here, we present SPRIG (Simple Polydisperse Residue Input Generator), a program for generating atomic-detail models of random polydisperse lignin copolymer melts i.e., the state most commonly found in nature. Using these models, we use all-atom molecular dynamics (MD) simulations to investigate the conformational and dynamic properties of polydisperse melts representative of switchgrass (Panicum virgatum L.) lignin. Polydispersity, branching and monolignol sequence are found to not affect the calculated glass transition temperature, Tg. The Flory-Huggins scaling parameter for the segmental radius of gyration is 0.42 ± 0.02, indicating that the chains exhibit statistics that lie between a globular chain and an ideal Gaussian chain. Below Tg the atomic mean squared displacements are independent of molecular weight. In contrast, above Tg, they decrease with increasing molecular weight. Therefore, a monodisperse lignin melt is a good approximation to this polydisperse lignin when only static properties are probed, whereas the molecular weight distribution needs to be considered while analyzing lignin dynamics.

Lytic polysaccharide monooxygenase synergized with lignin-degrading enzymes for efficient lignin degradation.

Even though the discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally shifted our understanding of biomass degradation, most of the current studies focused on their roles in carbohydrate oxidation. However, no study demonstrated if LPMO could directly participate to the process of lignin degradation in lignin-degrading microbes. This study showed that LPMO could synergize with lignin-degrading enzymes for efficient lignin degradation in white-rot fungi. The transcriptomics analysis of fungi Irpex lacteus and Dichomitus squalens during their lignocellulosic biomass degradation processes surprisingly highlighted that LPMOs co-regulated with lignin-degrading enzymes, indicating their more versatile roles in the redox network. Biochemical analysis further confirmed that the purified LPMO from I. lacteus CD2 could use diverse electron donors to produce H2O2, drive Fenton reaction, and synergize with manganese peroxidase for lignin oxidation. The results thus indicated that LPMO might uniquely leverage the redox network toward dynamic and efficient degradation of different cell wall components.

Quantitative Low-Field 19 F Nuclear Magnetic Resonance Analysis of Carbonyl Groups in Pyrolysis Oils.

Invited for this month's cover is the collaboration between Dr Rob Evans at Aston University, Birmingham, UK and Prof. Art Ragauskas at University of Tennessee, Knoxville and Oak Ridge National Laboratory, Oak Ridge, USA. The image illustrates that low-field, or benchtop, NMR spectrometers can be as effective as their higher-field counterparts in the accurate, quantitative analysis of bio-oils. The Research Article itself is available at 10.1002/cssc.202300625.

Bioconversion of Homogeneous Linear C-Lignin to Polyhydroxyalkanoates.

The bioconversion of homogeneous linear catechyl lignin (C-lignin) to polyhydroxyalkanoates (PHA) was examined for the first time in this study. C-lignins from vanilla, euphorbia, and candlenut seed coats (denoted as C1, C2, and C3, respectively) varied in their molecular structures, which showed different molecular weight distributions, etherification degrees, and contents of hydroxyl groups. A notable amount of nonetherified catechol units existed within C1 and C2 lignins, and these catechol units were consumed during fermentation. These results suggested that the nonetherified catechol structure was readily converted by Pseudomonas putida KT2440. Since the weight-average molecular weight of C2 raw lignin was 26.7% lower than that of C1, the bioconversion performance of C2 lignin was more outstanding. The P. putida KT2440 cell amount reached the maximum of 9.3 × 107 CFU/mL in the C2 medium, which was 37.9 and 82.4% higher than that in the C1 and C3 medium, respectively. Accordingly, PHA concentration reached 137 mg/L within the C2 medium, which was 41.2 and 149.1% higher than the C1 and C3 medium, respectively. Overall, C-lignin, with a nonetherified catechol structure and low molecular weight, benefits its microbial conversion significantly.

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass.

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. To address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.1%), 86.0% higher than the monophasic DES, accompanied by âˆ¼100% hemicellulose degradation. Notably, the GVL in the biphasic solvent restricted the condensation of hemicellulose degradation products, which as a result generated large amount of furfural in the pretreatment liquid with a yield of 68.6%. With the removal of hemicellulose and lignin, cellulose enzymatic hydrolysis yield was boosted and reached near 100%. This study highlighted that the novel DES/GVL is capable of fractionating the biomass and benefiting their individual utilization, which could provide a new biorefinery configuration for a DES pretreatment.

Coupling hydropyrolysis and vapor-phase catalytic hydrotreatment to produce biomethane from pine sawdust.

This study investigated hydropyrolysis and subsequent vapor-phase hydrotreatment over a NiAl2O4 catalyst to produce biomethane (CH4) from pine sawdust. The non-catalytic pressurized hydropyrolysis generated tar, CO2, and CO as the primary products. However, using a NiAl2O4 catalyst in the second-stage reactor significantly increased the formation of CH4 and reduced CO and CO2 in gas products. The catalyst also fully converted tar intermediates to produce CH4, resulting in a maximum carbon yield of 77.7% with 97.8% selectivity. The temperature plays a crucial role in CH4 generation, with both its yield and selectivity showing a positive correlation with the reaction temperature. Increasing the reaction pressure from 0.2 to 1.2 MPa notably inhibited the production of CH4, leading to a shift towards cycloalkanes due to a competitive reaction. This tandem approach shows great potential as an innovative technique for producing alternative fuels from biomass wastes.

Lignin with controlled structural properties by N-heterocycle-based deep eutectic solvent extraction.

The complex and heterogeneous nature of the lignin macromolecule has presented a lasting barrier to its utilization. To achieve high lignin yield, the technical lignin extraction process usually severely modifies and condenses the native structure of lignin, which is a critical drawback for its utilization in conversion processes. In addition, there is no method capable of separating lignin from plant biomass with controlled structural properties. Here, we developed an N-heterocycle-based deep eutectic solvent formed between lactic acid and pyrazole (La-Py DES) with a binary hydrogen bonding functionality resulting in a high affinity toward lignin. Up to 93.7% of lignin was extracted from wheat straw biomass at varying conditions from 90 °C to 145 °C. Through careful selection of treatment conditions as well as lactic acid to pyrazole ratios, lignin with controlled levels of ether linkage content, hydroxyl group content, and average molecular weight can be generated. Under mild extraction conditions (90 °C to 120 °C), light-colored native-like lignin can be produced with up to 80% yield, whereas ether linkage-free lignin with low polydispersity can be obtained at 145 °C. Overall, this study offers a new strategy for native lignin extraction and generating lignin with controlled structural properties.

Variable lignin structure revealed in Populus leaves.

Lignin has long been a trait of interest, especially in bioenergy feedstocks such as Populus. While the stem lignin of Populus is well studied, foliar lignin has received significantly less consideration. To this end, leaves from 11 field grown, natural variant Populus trichocarpa genotypes were investigated by NMR, FTIR, and GC-MS. Five of these genotypes were sufficiently irrigated, and the other six genotypes were irrigated at a reduced rate (59% of the potential evapotranspiration for the site) to induce drought treatment. Analysis by HSQC NMR revealed highly variable lignin structure among the samples, especially for the syringyl/guaiacyl (S/G) ratio, which ranged from 0.52-11.9. Appreciable levels of a condensed syringyl lignin structure were observed in most samples. The same genotype subjected to different treatments exhibited similar levels of condensed syringyl lignin, suggesting this was not a response to stress. A cross peak of δC/δH 74.6/5.03, consistent with the erythro form of the ß-O-4 linkage, was observed in genotypes where significant syringyl units were present. Principle component analysis revealed that FTIR absorbances associated with syringyl units (830 cm-1, 1317 cm-1) greatly contributed to variability between samples. Additionally, the ratio of 830/1230 cm-1 peak intensities were reasonably correlated (p-value < 0.05) with the S/G ratio determined by NMR. Analysis by GC-MS revealed significant variability of secondary metabolites such as tremuloidin, trichocarpin, and salicortin. Additionally, salicin derivatives were found to be well correlated with NMR results, which has been previously hypothesized. These results highlight previously unexplored nuance and variability associated with foliage tissue of poplar.

Systematic approaches to C-lignin engineering in Medicago truncatula.

BACKGROUND: C-lignin is a homopolymer of caffeyl alcohol present in the seed coats of a variety of plant species including vanilla orchid, various cacti, and the ornamental plant Cleome hassleriana. Because of its unique chemical and physical properties, there is considerable interest in engineering C-lignin into the cell walls of bioenergy crops as a high-value co-product of bioprocessing. We have used information from a transcriptomic analysis of developing C. hassleriana seed coats to suggest strategies for engineering C-lignin in a heterologous system, using hairy roots of the model legume Medicago truncatula. RESULTS: We systematically tested strategies for C-lignin engineering using a combination of gene overexpression and RNAi-mediated knockdown in the caffeic acid/5-hydroxy coniferaldehyde 3/5-O-methyltransferase (comt) mutant background, monitoring the outcomes by analysis of lignin composition and profiling of monolignol pathway metabolites. In all cases, C-lignin accumulation required strong down-regulation of caffeoyl CoA 3-O-methyltransferase (CCoAOMT) paired with loss of function of COMT. Overexpression of the Selaginella moellendorffii ferulate 5-hydroxylase (SmF5H) gene in comt mutant hairy roots resulted in lines that unexpectedly accumulated high levels of S-lignin. CONCLUSION: C-Lignin accumulation of up to 15% of total lignin in lines with the greatest reduction in CCoAOMT expression required the strong down-regulation of both COMT and CCoAOMT, but did not require expression of a heterologous laccase, cinnamyl alcohol dehydrogenase (CAD) or cinnamoyl CoA reductase (CCR) with preference for 3,4-dihydroxy-substituted substrates in M. truncatula hairy roots. Cell wall fractionation studies suggested that the engineered C-units are not present in a heteropolymer with the bulk of the G-lignin.

Quantitative Low-Field 19 F Nuclear Magnetic Resonance Analysis of Carbonyl Groups in Pyrolysis Oils.

Pyrolysis bio-oils, one of the products of lignocellulosic biomass pyrolysis, have the potential to be widely used as fuels. The chemical composition of bio-oils is very complicated as they contain hundreds, if not thousands, of different, mostly oxygen-containing, compounds with a wide distribution of physical properties, chemical structures, and concentrations. Detailed knowledge of bio-oil composition is crucial for optimizing both the pyrolysis processes and for any subsequent upgrading into a more viable fuel resource. Here we report the successful use of low-field, or benchtop, nuclear magnetic resonance (NMR) spectrometers in the analysis of pyrolysis oils. Pyrolysis oils from four different feedstocks were derivatized and analyzed using 19 F NMR techniques. The NMR results compare favorably with titrations for total carbonyl content. In addition, the benchtop NMR spectrometer proves able to reveal key spectral features, thus allowing the quantification of different carbonyl groups, such as aldehydes, ketones and quinones. Benchtop NMR spectrometers are typically compact, cheaper than their superconducting counterparts and do not require cryogens. Their use will make NMR analysis of pyrolysis oils easier and more accessible to a wide range of different potential users.

Mitigation of Hepatotoxicity via Boosting Antioxidants and Reducing Oxidative Stress and Inflammation in Carbendazim-Treated Rats Using Adiantum Capillus-Veneris L. Extract.

Exposure to food contaminants continues to be a substantial source of human health risks all over the world, particularly in developing countries. Carbendazim (CBZ) is a chemical fungicide used to control the spread of various fungi and other pathogens in the agriculture and veterinary sectors. The hazardous effects of CBZ on human health occur due to the accumulation of its residues in agricultural food products. In this study, the possible hepatoprotective effects of Adiantum capillus-veneris L. (ACVL) extract were evaluated in CBZ-treated rats. A GC-MS analysis revealed that ACVL extract contained several bioactive hydrocarbon components and fatty acids, and that the components exerted hepatic protection by mitigating oxidative stress via upregulating antioxidant agents and neutralizing nitrogen and oxygen free radicals. Moreover, ACVL extracts relieved hepatic inflammation via decreasing NO, NF-κB, and pro-inflammatory cytokines (TNF-a, IL-6) in the liver of CBZ-treated rats, both at protein and mRNA levels. In addition, the protective effect of ACVL has appeared in the histopathological figures and function markers in the livers of CBZ-treated rats. According to the present results, ACVL extract can protect the hepatic tissue and restore its functions to a control level in CBZ-treated rats; this effect may be attributed to its antioxidant and anti-inflammatory activities.

Cell wall response of field grown Populus to Septoria infection.

Due to its ability to spread quickly and result in tree mortality, Sphaerulina musiva (Septoria) is one of the most severe diseases impacting Populus. Previous studies have identified that Septoria infection induces differential expression of phenylpropanoid biosynthesis genes. However, more extensive characterization of changes to lignin in response to Septoria infection is lacking. To study the changes of lignin due to Septoria infection, four field grown, naturally variant Populus trichocarpa exhibiting visible signs of Septoria infection were sampled at health, infected, and reaction zone regions for cell wall characterization. Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and acid hydrolysis were applied to identify changes to the cell wall, and especially lignin. FTIR and subsequent principal component analysis revealed that infected and reaction zone regions were similar and could be distinguished from the non-infected (healthy) region. NMR results indicated the general trend that infected region had a higher syringyl:guaiacyl ratio and lower p-hydroxybenzoate content than the healthy regions from the same genotype. Finally, Klason lignin content in the infected and/or reaction zone regions was shown to be higher than healthy region, which is consistent with previous observations of periderm development and metabolite profiling. These results provide insights on the response of Populus wood characteristics to Septoria infection, especially between healthy and infected region within the same genotype.

Alternative splicing: transcriptional regulatory network in agroforestry.

Alternative splicing (AS) in plants plays a key role in regulating the expression of numerous transcripts from a single gene in a regulatory pathway. Variable concentrations of growth regulatory hormones and external stimuli trigger alternative splicing to switch among different growth stages and adapt to environmental stresses. In the AS phenomenon, a spliceosome causes differential transcriptional modifications in messenger RNA (mRNAs), resulting in partial or complete retention of one or more introns as compared to fully spliced mRNA. Differentially expressed proteins translated from intron-retaining messenger RNA (mRNAir) perform vital functions in the feedback mechanism. At the post-transcriptional level, AS causes the remodeling of transcription factors (TFs) by the addition or deletion of binding domains to activate and/or repress transcription. In this study, we have summarized the specific role of AS in the regulation of gene expression through repression and activation of the transcriptional regulatory network under external stimuli and switch among developmental stages.

Novel candidate genes for lignin structure identified through genome-wide association study of naturally varying Populus trichocarpa.

Populus is a promising lignocellulosic feedstock for biofuels and bioproducts. However, the cell wall biopolymer lignin is a major barrier in conversion of biomass to biofuels. To investigate the variability and underlying genetic basis of the complex structure of lignin, a population of 409 three-year-old, naturally varying Populus trichocarpa genotypes were characterized by heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR). A subsequent genome-wide association study (GWAS) was conducted using approximately 8.3 million single nucleotide polymorphisms (SNPs), which identified 756 genes that were significantly associated (-log10(p-value)>6) with at least one lignin phenotype. Several promising candidate genes were identified, many of which have not previously been reported to be associated with lignin or cell wall biosynthesis. These results provide a resource for gaining insights into the molecular mechanisms of lignin biosynthesis and new targets for future genetic improvement in poplar.